LYSAGHT® Zed & Cee Purlins and Girts

LYSAGHT® Zed & Cee Purlins and Girts

LYSAGHT® Zed & Cee Purlins and Girts

Product Description and Features

LYSAGHT® Purlins and Girts are lightweight structural steel members, designed in accordance with the AS/NZS 4600: 1996 Cold Formed Steel Structures utilising high strength zinc-coated steel.

LYSAGHT® Zed sections may be used over single spans, unlapped and lapped continuous spans in multi-bay buildings. Lapped continuous spans result in considerable capacity increase in the system.

LYSAGHT® Cee sections may be used in single spans, and unlapped continuous spans in multi-bay building and are ideal as eave purlins or where compact sections are required for detailing.

  • A range of gauges and depths are available
  • Can be provided punched and unpunched
  • Non-standard sizes may be available on application
  • A down-turned bottom lip on your LYSAGHT® Zed Purlin, is available on request.

Note:

  • LYSAGHT® Cee sections cannot be lapped
  • Cee and Zed purlins are normally supplied un-punched. If punching is required punching details should be specified at the time of ordering
  • Purlins should be stored off the ground and on a slight slope so that water can drain away
  • Direct contact of incompatible material with coating should be avoided. In such applications, suitable paint systems should be obtained from paint manufacturers
  • Consider orientation of Zed and Cee purlins in relation to possible build-up of substances such as dust or grain
  • Special transport requirements are needed for lengths over 12000mm
  • Span tables assume the use of LYSAGHT® bridging and LYSAGHT® recommended bolts
No Comments

Post A Comment